• remove screws and raise cover - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    Remove the screws from the cover. Using the handle gently raise the cover.

  • remove upper and lower grates - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    Remove upper grate. Remove lower grate.

  • loosen set screws - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    Loosen the set screws. Carefully slide the blade assembly off.

  • line up blade notches - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    Line up the blade notches with the holes. Keep the set screws holes together.

  • tighten set screws - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    Loosen set screws. Carefully move blade assembly into position. Tighten screws.

  • how to sharpen blades - EZcut is Canada's leading manufacturer of carpet and vinyl floor covering cutting machines and carpet cutting supplies

    While the machine is running, using your angle grinder with 120grit. Sharpen both sides at about 15deg. The proper safety must be used while sharping!

Modern Earth Web Design, Winnipeg, Manitoba, Canada